Bleed valves can be used on instrumentation devices such as multi-valve manifolds or gauge valves to vent signal line pressure to atmosphere before removal of an instrument or to assist in calibration of control devices.

•  Compact for convenient installation.
•  Standard Male NPT end connections.
•  Working pressures up to 10 000 psig (689 bar).
•  Every Valve is factory tested at 1000 psi with Nitrogen Gas.
•  Heat Code traceability.
•  NACE MR-0-175 Compliant materials available on request.
•  All Components are Ultrasonically cleaned prior to assembly.
•  Pneumatic seat test is performed at 1000 PSI. Medium – Nitrogen gas.
•  Hydrostatic seat test is performed at 1.1 times the working pressure.
•  Hydrostatic shell test is performed at 1.5 times the working pressure.
•  All the Valves are 100% Factory Tested.
•  3.1 Certificates furnished. 3.2 certificates available on request.